Two lines, same fit

  • BULDER Quick-Screw 5 inch hidden gutter hangers, 10 pack kraft box

    Standard

    Our everyday line, and the one most jobs use. Aluminum, screw pre-fitted, same K-style fit as the premium line. Packs from 10 to 500.

    Shop Standard 
  • BULDER Quick-Screw 5 inch Made in USA hidden gutter hangers, 10 pack box with the included 1/4 inch magnetic driver bit

    Made in USA

    The same hanger, made here. Every pack comes with a 1/4-inch magnetic driver bit, free — the hanger clips onto it and stays put, so you can set one from the ladder one-handed.

    Shop Made in USA 

Built for the job

  • Superior Strength

    Aluminum that holds the line straight under a full gutter and doesn't oil-can between hangers.

  • Screw already in

    Every bracket ships with its screw already fitted. No loose hardware, no sorting on the ladder.

  • Hidden by design

    The bracket sits behind the gutter lip. From the ground the run reads as one clean line.
Shop all sizes
Bulder Quick-Screw hidden gutter hanger with the screw pre-fitted in the bracket

This is the hanger

Aluminum, with the screw already fitted in the bracket. The hooked end drops into the rolled front lip of the gutter and the screw drives through the fascia into the rafter behind it — so the whole hanger sits down inside the gutter, with nothing to see from the ground. Made for aluminum K-style gutters, and they fit vinyl and plastic K-style too.

Shop all hangers

5-Inch Gutter Hangers

6-Inch Gutter Hangers

Buy by the pack

  • Starter — 10 packs

    A repair, a short run, or a first job. Enough to do the work without paying for a case you don't need.

  • Whole-house — 25 and 50 packs

    Enough to hang a full house in one trip, at a better price per hanger than the small packs.

  • Contractor — 100, 250 and 500 packs

    Our lowest price per hanger, for crews, large jobs and resellers. Need a pallet? Call us and we'll quote it direct.
See every pack size
Cutaway view of a Bulder hidden gutter hanger seated inside a K-style gutter, out of sight from the ground

Installed in four steps

  1. Space them every 18 to 24 inches along the run.
  2. Fit the hooked end into the rolled front lip of the gutter.
  3. Clip the screw end to the back wall and press down until it seats.
  4. Drive the pre-fitted screw through the fascia and into the rafter end behind it — the rafter is what carries the load.
How to install

Why BULDER?

We make one part, and we make it properly. Every bracket is aluminum with its screw already fitted, packed and shipped from our own warehouse in Lakewood, New Jersey. Most orders placed by 3 p.m. Eastern go out the same business day. Nothing is drop-shipped. If you need volume or a pallet, call us and we'll quote it directly.