Hidden hangers that hold 5-inch K-style gutters tight to the fascia - with the screw already in. Made in USA.
Each hanger arrives with the screw already fitted, so there is no hardware to sort on the ladder. Drive it straight through the gutter, through the fascia and into the rafter end behind it, with a standard 1/4" nut driver. The bracket sits behind the gutter lip and stays out of sight from the ground.
Free in every pack: a 1/4-inch magnetic driver bit. Snap it into any drill and the hanger clips on and stays put — one hand for the drill, one for the ladder.
Made for 5-inch aluminum K-style gutters. They fit vinyl and plastic K-style too. Packs of 10, 25, 50, 100 and 500.
Two lines, same fit. This one and our standard line both fit 5-inch K-style gutters and install identically. The difference is where they are made. If US manufacture matters to you or your customer, this is the one.
